Configure OpenRoaming in Cisco SDA (part2)

So what happen at the protocol level when configuring openroaming on a Cisco SDA-network? I will explain it here in part 2 of Configure OpenRoaming in Cisco SDA

Configure OpenRoaming in Cisco SDA (part1)

With a Cisco Software Define network (SDA) many things are automated. But what if we want to configure something that’s not configurable from the DNA Center? Automation is limited till it is built to do so. In this blog article, I’m going to explain how to integrate OpenRoaming with Cisco SPACES and integrated it with Cisco SDA.

Can we turn off the Access Points to save power?

Can we turn off the Access-Point (AP) to save power? It depends, do we want to do that? But we don’t have a power switch on the AP. How to do it? Lets talk about it!..

How to Create zones In Spaces

With a Real-Time Location System we most often not only want to track users moving behavior, but also count the user per building, floor, or room level.
The title of this blog post is called “How to Create zones in Spaces”, because, in a Cisco Wireless eco-System we use zoning to make this possible. One click away I’m going to explain how to set up zoning with Spaces

SGT = Security Group Tag or Scalable Group Tag?

I saw often people use different terms for SGT in a Cisco environment, depending on where their start working with the technologies. Cisco is sometimes in the habit of reusing acronyms. I Don’t want to write a full blog about this but with acronyms especially with Cisco make sure all people in the conversation are […]

Configure multiple BSSID

When you try to set up a second wireless network you propably gonnarun into this notification: ‘Dot11Radio0: Guest-ssid already existing on ssid STARGATE’ Of course you can set up a wireless network without guest-mode enable but keep in mind that the access point will not include the guest SSID in its beacon. So the client […]